Truck:
95 V6 5Sp
Mods:
no Cat. Synthetic oil. K&N dropin, removed grill air blocker,
Dynomax Race Magnum Muffler.
Problem:
Will suddenly stall and will not start back. Can tell when it is about
to stall because the RPM's will drop about 200. About 2-3 miles later
it
usually will stall. Will not start back until engine has completely
cooled.
Discovered that the reason engine stalls is because it is not getting
fire.
Can not find out what causes it to lose fire.
Computer Codes:
11 - No signal from crank sensor
Solutions that don't work:
Pick-Up assembly is fine.
Coil is fine.
All sensors etc are connected correctly.
All plug wires are connected correctly.
Crank sensor works fine when cold. Haven't checked it hot yet after
stall.
Currently in process of checking after engine stalls.
Computer connections are clean, greased and connected correctly.
Have not checked yet:
PCM.
I did not know, but discovered that the ignition was IN the PCM. So,
I am thinking the problem is there.
Can you help:
Can anyone think of anything else to check? I am at a loss!
Thank You,
Chad Clifton
mcc@negia.net
'95 V6 CC 5speed
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:26 EDT