Josh, same flow rate yes, but a smaller diameter means
less air flow... get as large as you can possibly
fit! better to have too much and the fan not run as
often as have too little air flow and overheat...
--- BlKV8Dkota@aol.com wrote:
> I would but it has the same flow rating so I thought
> to save a little space I
> would go with the smaller one.
>
> Josh
>
===
Jon Smith -- Raleigh, NC
'95 CC SLT 4x4 318 auto (15.653@89.12)
MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back glasspacks, 180 degree thermo, spectre wire dividers, ASP underdrive crank pulley, Hayden 16" elec. fan
http://come.to/killbilly
ICQ # 9720504
IM: Fast4x4
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:29 EDT