Greg
There is a hole under the rocker panel with a rubber stopper in it. You can
pull the stopper out and feed the wire up through into the body. You have to
remove the interior panel below the window to get at the wire. Only drawback
of doing this is the connector won't fit through up into the inside. Might be
able to also pull the carpet up and enlarge this area with a dent puller. I
ran my CB wire in this way but had to put on a radio shack connector for the
back of the radio/
Good luck
Gardner
94 Dak SLT CC 3.9 4x4
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:30 EDT