>
> Greg
> There is a hole under the rocker panel with a rubber stopper in
> it. You can
> pull the stopper out and feed the wire up through into the body.
> You have to
> remove the interior panel below the window to get at the wire.
> Only drawback
> of doing this is the connector won't fit through up into the
> inside. Might be
> able to also pull the carpet up and enlarge this area with a dent
> puller. I
> ran my CB wire in this way but had to put on a radio shack
> connector for the
> back of the radio/
> Good luck
>
Hmmm gotta check it out... I could run it up thru the shifter, but I'd worry
about the coax somehow getting loose and doing the nasty with the drive
shaft... I have no problem replacing the connector, that is second nature to
me...
Greg
95 DSCC v6 5spd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:31 EDT