>
> I had thought of drilling a small hole and placing a grommet in it behind
> the cab, but that would require removing the bed....which I don't have the
> room for in my driveway. (Neighbors wouldn't like it either.)
>
> My Firestik-2 sits on the bed rail right behind the cab on a spring and
> quick-connect. (That way I just turn it a 1/4 turn and remove it for
> underground parking and car washes.) I ran my coax the same way
> you did. I
> did, however, grind a small groove to relieve some of the "pinch" on the
> cable when the window is closed. Then, ran it behind the backrest on the
> rear seat and under the carpet up to the front under the dash by
> the center
> console. God help me if I ever have to replace that
> cable....took me almost
> a day to fish it through the center hump. Also had to remove the driver
> seat to make it easy.
>
> Later,
>
> Bernd
Was considering doing almost that.. but drill a hole near the storage bins
and run it that way. I don't have the window closed all the way.. just
enough the catch the latch. Ran the coax around the cab under the plastic
edge pieces up into the dashboard. The radio is mounted under the
ashtray....
Greg
95 DSCC v6 5spd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:30 EDT