If you have the 8.25" which comes in most of the Daks, you can go from 3.55
to 4.10 with only the Ring and Pinion change. Anything higher required a
new carrier.
Bernd D. Ratsch
Pflugerville, TX
'97 Dakota SLT/CC (V6)
bernd@texas.net
http://lonestar.texas.net/~bernd/Dakota.htm
ICQ#: 39320084
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Bob B Ford
Sent: Wednesday, June 30, 1999 12:21 AM
To: dakota-truck@buffnet.net
Subject: Re: Re[2]: DML: limitied slip differential
>>>it's a 99 with the 9.25" rear end and 3.55 gears. I believe I have
someone who will do it for next to nothing,
>I just need to know what parts are best ?
Mine's a related question. I have 3.55 limited slip. I want to go to 3.92
or 4.11's with limited slip.
Will I have to get a new limited slip setup or can they use my 3.55
stuff? Also which is better to go to?
3.92 or 4.11? I have a 5.2L w 5 speed.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:48 EDT