Re: tech question on removing distributor

From: David Nuce (sunrise@bright.net)
Date: Mon Jul 05 1999 - 17:21:01 EDT


Exactly right.

Good luck-
David Nuce
sunrise@bright.net

----- Original Message -----
From: Jon Smith <jdsmith4@yahoo.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, July 05, 1999 4:31 PM
Subject: DML: tech question on removing distributor

>
> How important is it to bring the motor to TDC before
> removing the dist? As long as I record the relative
> positions of the rotor/distributor AND the
> distributor/intake locations and I don't turn the
> motor over while it's out everything should be A-OK
> when I put the dist. back in?
>
>
>
> ===
> Jon Smith -- Raleigh, NC
> '95 CC SLT 4x4 318 auto (15.653@89.12)
> MP comp, JBA headers, 8.5mm MSD wires, 14x3 FABM & SBBS, dual cat-back
glasspacks, 180 degree thermo, spectre wire dividers, ASP underdrive crank
pulley, Hayden 16" elec. fan
> http://come.to/killbilly
> ICQ # 9720504
> IM: Fast4x4
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:51 EDT