does it matter if the truck is a 4x2 or a 4x4..
i have picked out to use the following
msd 6 ignition - msg6200
blaster ss coil - pn8207
where can i get the blaster ss coil ? i check summit racing for the msg
ignition, but if u know a place where i can get cheaper, please let me
know.....
------
Eric Giblock
shortdogg@ncweb.com
http://www.ncweb.com/~shortdogg
----- Original Message -----
From: <GrnDak4x4@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, July 06, 1999 12:51 PM
Subject: Re: DML: Re: MSD stuff...
> On my 3.9L , as far as ignitions mods I have are:
> MSD 6-Offroad Ignition Box, PN#6470
> MSD Universal wiring harness, PN#8873
> MSD 8.5MM Super Conductor wires, PN#32189
> Champion Truck Plugs, gapped at .050
> Accel Super Coil, PN#140021
> Borg Warner Select Brass Cap and Rotor
>
> Hope this helps.
> Kyle
> 93 Dakota 4x4 V6
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:52 EDT