can you get that stuff at home depot or lows or somthing because i don't know
where to get that ABS and plastic sleeves.
Dester243@aol.com wrote:
> I'd go with the 3 inch pipe. you can get a 3" to 3" plastic sleeve connector
> for about 6 bucks (i think) and then bend it in all the places you want it
> to come out and it'll goto the filter. The 6" K&N should have a round
> opening with a ring clamp on the end. that's how mine is.... and i just put
> that over the 3" pipe and clamped it. REMEMBER to get brackets to support
> the housing. My piping is polished alumium which doesn't heat up badly due
> to it's metalic characteristics, and it's also light.
> ABS? are you trying to say PVC? or maybe i'm not thinking right coz i'm sick
> -Dester
>
> > i'm starting to make my homemade k&n air filter and am wondering if i
> should
> > get a 3"
> > pvc or a 2".
> > any suggestions on how to complete this work of art? (like how to conect
> > the filter
> > to the pipe).
> >
> > garrett
> > 3.9 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:56 EDT