Re[2]: Re[2]: RE: going from 3.90 to 4.10 gears

From: fawcett@uism.bu.edu
Date: Fri Aug 13 1999 - 15:21:53 EDT


I always thought you could set 'em up to be within 1-2% of each other but no
more... That way you could set the fronts up a little higher for rock crawling
and stuff. The difference seemed so small that I never gave it much thought.
Not to mention the fact that I don't have a beater lying around to do any
serious rock crawling with. :o)
Tom

____________________Reply Separator____________________
Subject: Re: Re[2]: DML: RE: going from 3.90 to 4.10 gears
Author: <dakota-truck@buffnet.net>
Date: 8/13/99 2:55 PM

>> I have a dak 4x4 with 3.55 rear gear.
>> I heard the fromt differential has a
>> different ratio for the 4x4. So what
>> is my fromt gear? Is this true?

They are the same...otherwise they would be turning/pulling at
different rates when in 4x4

To email David's Dakota send to: dakota@ivyleague.net

To see specifications see:
http://csclub0.cs.fredonia.edu/WWWProfile/dakota/Wd27F4cwBQpTo



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:47 EDT