what are shoes?
_______________________________________
Jon Smith-------Raleigh,NC-------ICQ: 9720504
'95 318 auto CC 4x4 3.90 31" A/T's
JBA headers, dual glasspack, 14x3 FABM
F&B Stage I TB, MSD 8.5's, self-moded intake
MP SBEC, 180 degree thermo, ASP crank pulley,
16" Hayden elec. fan 0-60mph in 6.3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----- Original Message -----
From: KURTZ ERIC <erics5.9@home.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, August 26, 1999 5:29 AM
Subject: DML: Now TB/Manifold Opening attn Jon
>
> Nice Picture. Man, dont you know you should wear shoes when you out
> in the garage messing with stuff like that! lol
> Eric
> Jons foot is in the lower left corner of his intake pic
> Jon Smith wrote:
> >
> > Bernd, if I'm thinking of the part that you're talking about, it is
some
> > rough casting that didn't get milled out. I noticed this when I had the
> > manifold off, and ground them out. I've got some pics of it on my
> > webpage.... www4.ncsu.edu/~jdsmith4
> > _______________________________________
> > Jon Smith-------Raleigh,NC-------ICQ: 9720504
> > '95 318 auto CC 4x4 3.90 31" A/T's
> > JBA headers, dual glasspack, 14x3 FABM
> > F&B Stage I TB, MSD 8.5's, self-moded intake
> > MP SBEC, 180 degree thermo, ASP crank pulley,
> > 16" Hayden elec. fan 0-60mph in 6.3
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > ----- Original Message -----
> > From: Bernd D. Ratsch <bernd@texas.net>
> > To: <dakota-truck@buffnet.net>
> > Sent: Wednesday, August 25, 1999 9:16 PM
> > Subject: RE: DML: Street and performance - Now TB/Manifold Opening
> >
> > >
> > > Ok....since we're on the subject of TB's and Manifolds (again),
> > >
> > > Has anyone noticed that when the stock (and modified) TB's are on the
> > intake
> > > manifold (and looking down the barrels at WOT), the center of both
barrels
> > > have a manifold obstruction to flow around. To put it in easy to
> > understand
> > > terms: You open the blades all the way open and look through them
into
> > the
> > > manifold.
> > >
> > > I know port-matching helps out for power gains (more on some than
others)
> > > but has anyone tried to grind the center of the plenum to better fit
the
> > TB?
> > >
> > > Bernd D. Ratsch
> > > Pflugerville, TX
> > > 1997 Dodge Dakota SLT/CC - 2WD
> > > http://lonestar.texas.net/~bernd/Dakota.htm
> > > bernd@texas.net
> > > ICQ: 39320084
> > >
> > >
> > >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:03 EDT