Ed contacted me and they were some generic (P.O.S.) bulb. Don't know why
they sent them but they didn't match the part numbers that I had ordered
from them. (Guess it might be a crap shoot to buy parts from JC Whitney)
Just turn the light and pull. It takes a little to break the factory seal
the first time but they come out.
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
SmokinDakota
Sent: Tuesday, August 31, 1999 12:08 AM
To: DML
Subject: DML: Changing headlights?
Hey all,
Everyone who was at the So. CAL BBQ this weekend probably saw Ed changing
out my headlights for some 80/100 JC whitneys. Unfortunatly, they are crap.
They already burnt out with less than 3 hours of use. DON'T BUY THESE. So
how do I get the actual light out? Do I have to turn and pull out? Or just
give it a good pull? It doesn't want to budge and I sure don't want to break
my headlight.
Steven 2me
http://www.smokindakota.com
AOL IM = SmknDakTrk
ICQ = 42763370
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:16 EDT