In a message dated 9/9/99 8:04:40 AM Pacific Daylight Time, schred1@yahoo.com
writes:
<<
Bore Spacing = 4.09"
Basic Bore Size = 3.66"
Roundness = Max of .00015"
Taper = Max of .0006"
Stroke = 3.405"
Rod/stroke ratio = 1.80
Intake valves = 1.89"
Exhaust valves = 1.46"
I'm totally engine illiterate myself, so this might
not make any sense! I just extracted this from the
Mopar Action 4.7L article which you can download from
the DML attatchments (schred1@yahoo.com folder)
Theres a whole ton of other info in there that makes
just about as much sense to me as the above so you
might want to take a gander at it! (BTW - it's alot
easier to read if you print it out - scanned)
>>
thanks Nate! Now to the Dyno 2000!
Boog
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:40 EDT