Re: Tired of rough idle/Ignition mod advise.

From: Bob Tom (tigers@bserv.com)
Date: Fri Sep 24 1999 - 17:13:12 EDT


At 02:28 PM 9/24/99 -0500, you wrote:
> <snip>
>MSD-6 (P/N: 6200) is fine (unless you take if offroading quite a bit.
>SplitFire Plugs (Personal preference) but the Champion Truck Plugs seem to
>work ok.
>MSD or Magnecore...either one is fine
>Borg-Warner has them (Don't know the part numbers for the V8)

  Borg Warner Cap C274, $6.64, and rotor D223 $2.22, BRASS
    use $ as guidelines

>Accell makes the bolt-on Coil or use the MSD recommended Blaster-SS

  www.mrgasket.com ... for '90-'97 ... may be most effective for
                                          your truck's symptoms?

------------- original message -----------------------------------------
>>At 03:12 PM 09/24/1999 -0400, you wrote:
>> <snip> I think I need the following;
>>MSD 6A/or 6T/or 6 off road. Which one should I get???
>>Chapion Truck plugs (pn# 4071 Right?)
>>Magnacor 8.5mm or MSD 8.5mm wires??
>>Brass cap (who makes this? part #?)
>>Rotor (is there a speacial one for the brass cap?)
>>Super Coil (I think there is one that fits in the stock location?? part #??)
>> <snip>

Bob, Burlington, Ontario
'97 FR CC Sport, 5.2L, 3.55 SG, auto., 15.268 @ 88.86



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:09 EDT