Re: rebuilt engine options... HELP!

From: BoogYT1300@aol.com
Date: Wed Oct 06 1999 - 06:49:11 EDT


In a message dated 10/5/99 7:03:30 PM Pacific Daylight Time, msykes@su.edu
writes:

<< From there I will get the cylinders bored (not much..gotta' pass a
sniffer), new pistons, Magnum heads, then transfer all my stuff from there.
I'm sure my crank and cam are aiight enough to transfer over to a new
motor.... I hope... >>
You will have to get a new cam for the magnum heads, they use roller cams.
And have your crank cheaked for clearances (wear) magnafluxed for heat stress
cracks. There is alot more you will need.
Boog



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:40 EDT