Re: Spring shackles WAS -- lowering help --

From: nosdakota (nosdakota@email.msn.com)
Date: Thu Oct 14 1999 - 23:39:24 EDT


yes you still need the shim it makes sure the pinion angle is kept within
spec in relation to the shaft. otherwise you'll go through alot of parts
sooner or later
Joe W.
87 Shelby Charger 13.9
98 Dakota 13.1
----- Original Message -----
From: <Dester223@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, October 14, 1999 10:56 PM
Subject: Re: DML: Spring shackles WAS -- lowering help --

> BUT.. when you do a 2-2 drop. don't they cancel each other out? or
should
> i still get a shim? if so. what degree?
> -Dester
>
> << Don't have any fancy degrees in that subject...but common sense
dictates
> that YES...they should be kept within factory specifications. (using
shims
> is the best way)
>
> Any reputable lift/lowering kit SHOULD have these included.
>
> - Bernd >>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:56 EDT