Re: spring clamps anyone?

From: Todd Flummer (mustang@netunlimited.net)
Date: Tue Oct 19 1999 - 10:58:53 EDT


Jon,
What's happening on the 29th? The rock?

Todd
Mustang@netunlimited.net
www.netunlimited.net/~mustang/

-----Original Message-----
From: Jon Smith <fast4x4@bellsouth.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, October 19, 1999 12:01 AM
Subject: DML: spring clamps anyone?

>Aight, here's the deal, went to get some steel to make some spring clamps
>today (to kill my wheel-hop) bad part is the company has a $25min charge.
>So before I hit the scrap yard to get 16" of the stock, I figgured I'd see
>how much interest I can stir up on the DML. The material is $0.75 per
foot,
>and since 16" is required for each application, my math (which isn't
>exactley good) brings the grand total to $1.00 per truck.
>
>So here's the offer, I'll buy the stock, cut and drill as needed and
include
>neccesary hardware if there is sufficient interest. Total costs will be
>split up umong those interested, I'm not out to make any profit, just gotta
>get more traction before I break into the 14's on the 29th.... (knock on
>wood)
>____________________________________________
>Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
>'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
>dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
>MSD 8.5's, self-moded intake, 180 degree thermo,
>ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
>BEST: 0-60 in 6.3 & 1/4mi 15.5@87.5
>207.2 RWHP, 276.2 RW ft/lbs
>ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:05 EDT