Re: Re: spring clamps anyone?

From: Jon Smith (fast4x4@bellsouth.net)
Date: Tue Oct 19 1999 - 11:18:21 EDT


Yessir, gonna be over 20 of us goin as a group. Buddy of mine has a quit a
bit of pull with the track owner, gonna try and get them to spray the whole
track w/ VHT.. man I'm gonna need it for drivin around your lettuce picker
:-)

BTW, this is close to the end of the race season, any other DML'ers up for
it? Preacher? wanna line our 4x's up? Terri? think your extra 6 horses
can take me??? hehehe I'm full of it today! :-)
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.5@87.5
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: Todd Flummer <mustang@netunlimited.net>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, October 19, 1999 10:58 AM
Subject: DML: Re: spring clamps anyone?

> Jon,
> What's happening on the 29th? The rock?
>
> Todd
> Mustang@netunlimited.net
> www.netunlimited.net/~mustang/
>
> -----Original Message-----
> From: Jon Smith <fast4x4@bellsouth.net>
> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
> Date: Tuesday, October 19, 1999 12:01 AM
> Subject: DML: spring clamps anyone?
>
>
> >Aight, here's the deal, went to get some steel to make some spring clamps
> >today (to kill my wheel-hop) bad part is the company has a $25min charge.
> >So before I hit the scrap yard to get 16" of the stock, I figgured I'd
see
> >how much interest I can stir up on the DML. The material is $0.75 per
> foot,
> >and since 16" is required for each application, my math (which isn't
> >exactley good) brings the grand total to $1.00 per truck.
> >
> >So here's the offer, I'll buy the stock, cut and drill as needed and
> include
> >neccesary hardware if there is sufficient interest. Total costs will be
> >split up umong those interested, I'm not out to make any profit, just
gotta
> >get more traction before I break into the 14's on the 29th.... (knock on
> >wood)
> >____________________________________________
> >Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
> >'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
> >dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
> >MSD 8.5's, self-moded intake, 180 degree thermo,
> >ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
> >BEST: 0-60 in 6.3 & 1/4mi 15.5@87.5
> >207.2 RWHP, 276.2 RW ft/lbs
> >ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
> >
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:05 EDT