Re: dakota body lift and suspension CORRECTION

From: GrnDak4x4@aol.com
Date: Wed Oct 20 1999 - 14:20:55 EDT


In a message dated 10/20/99 12:42:29 PM Central Daylight Time,
brian.duffey@intelsat.int writes:
<< O.K.
 So now that we have all that settled, What Wheels are you going to use?
 What wheels have the trucks that you've looked at used?
 I was leaning towards the Mickey Thompson wheels (very heavy duty) but they
 only list one wheel in our bolt pattern (6 on 4.5 inch), and that one has
 the 4.5 inch backspace.
 Getting the lift, etc. done seems to be the easy part. Finding decent HD
 wheels with all the right dimensions is the big pain in the ass of the whole
 project.
>>
Of course, you also need to consider how wide of tire you plan to run and
what width rim is required for that size tire. I suggest go to any tire/rim
dealer and tell them what you are looking for, and trust me, if they want
your money they will find you rims for your truck with the specs you want and
need!!!! However, I havent really looked at rims. TrailMaster did send me a
list of rims however. Here it is:
SunDel Wheel Co; 110 Sprinter(PN#110-0-57645)
    -15x7 with 6-4.5 Bolt Pattern
    -3.58" Backspacing
Ultra Custom Wheels; Type 49(PN#49-5886)
    -15x8 with 6-4.5 Bolt Pattern
    -3.75" Backspacing
Ultra Custom Wheels; Type 64
    -15x8(PN#64-5886P); 3.5" Backspacing
    -15x10(PN#64-5186P); 3.5" Backspacing
    -15x12(PN#64-5286P); 3.5" Backspacing
Weld Racing
    -VR-11; 5 Spoke Knuckle(PN#11-58666L,R); 15x8 with 3.5" Backspacing
    -VR-12; Cyclone(PN#12-58666L,R); 15x8 with 3.5" Backspacing
    -VR-27; 5 Spoke Tomahawk(PN#27-58666L,R); 15x8 with 3.5" Backspacing
Billet Specialties also carried them in all of their Premier Series.
Hope this helps!!!!!!!!!
Kyle
93 Dakota 4x4 V6



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:11 EDT