Re: got kicked off (comes back with a 2-2 drop!)

From: nosdakota (nosdakota@email.msn.com)
Date: Sat Oct 23 1999 - 08:12:50 EDT


I'll second the vote for ear plugs
you'll never get the whole rivit off in one shot. just take it off piece by
piece and it comes right off. It also helps to stop and sharpen the chisel
every few minutes.
Joe W.
87 Shelby Charger 13.9
98 Dakota 13.1
----- Original Message -----
From: <Dester223@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, October 23, 1999 2:14 AM
Subject: Re: DML: got kicked off (comes back with a 2-2 drop!)

> 5 minutes? I had to shave the heads a bit, THEN Air chisel. I found out
on
> the last rivit that i can go in sideways on the bolt. shave a bit off the
> top. piece by piece and it would be a LOT faster, but by then. i already
lost
> my hearing too!
> -Dester
>
> PS. if you do this. PLEASE buy ear plugs..
>
> << I was able to air chisel mine off it took about 5 minutes per side.
that
> was
> to remove both front and rear hangars
> Joe W.
> 87 Shelby Charger 13.9
> 98 Dakota 13.1 >>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:12 EDT