Re: Oxygen sensor

From: Jon Smith (fast4x4@bellsouth.net)
Date: Mon Oct 25 1999 - 16:05:58 EDT


it's simple, if it won't break loose (when cold!!!) start the truck and let
it warm jus a lil bit. try some penetrating oil if that doesn't work (MAKE
SURE the penetrating oil is NON FLAMMABLE) i.e. don't use WD-40 on a hot
pipe duh!!

also, don't let oils get on the new sensor, don't touch the sensor area w/
your fingers either. and remember to unhook the computer
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.5@87.5
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: Christopher L Scott <clscott@cse.Buffalo.EDU>
To: <dakota-truck@buffnet.net>
Sent: Monday, October 25, 1999 3:28 PM
Subject: DML: Oxygen sensor

> Quick, somebody tell me how hard it is to replace the oxygen sensor on a
> 94 3.9 and is there any tricks I should know. I got the code on my check
> engine light a today, and I am going to replace it today, cause I'm
> driving to Philadelphia on Wednesday. Thanks!
> Chris Scott
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:16 EDT