cost of IAT was:Re: Symptoms of Bown Intake Manifold gasket???

From: Jon Smith (fast4x4@bellsouth.net)
Date: Thu Oct 28 1999 - 01:23:57 EDT


new IAT was $24 at Hendrick Dode
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.5@87.5
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: <Dester223@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, October 28, 1999 1:08 AM
Subject: Re: DML: Symptoms of Bown Intake Manifold gasket???

> When i took my IAT out. I noticed it was blackish filmed too. ya never
> know.. darn dakotas!
> -Dester
>
> how much was the new IAT? or did you just take the other IAT out and put
a
> 1/4" pipe plug nut into it?
>
>
> << Help me here DML members!
>
> I just got a new IAT sensor to play with at the track. I had to take the
> old one off to get it's part #. It was COVERED in a thick layer of burnt
> motor oil. Looked like carbon buildup. I have a distinct feeling that
> there isn't supposed to be any oil on the sensor. =( Which leads me to
> believe I have a blown intake manifold gasket. I also gets some pinging,
> but I have the MP SBEC and run 92/93 octane. Oh ya, truck is a 93 Dak
V8.
> Any help would be greatly appreciated.
>
> Thanks a bunch!
>
> Brian >>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:30 EDT