Re: RE: ..And More Ping Questions.

From: Fast4x4 (fast4x4@bellsouth.net)
Date: Sun Oct 31 1999 - 11:03:26 EST


How many times have you had it to the dealer for this? Have you checked
your state's lemon laws?
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: Erika Ipes <msbavior@hotmail.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, October 31, 1999 10:45 AM
Subject: Re: DML: RE: ..And More Ping Questions.

> The dealership has rerouted ignition wires,replaced cruise clip and
retainer
> ignition cable, performed combustion chamber cleaning I don't know how
many
> times on a vehicle with less then 15,000 miles on it, replaced my intake
> gasket, then replaced my intake manifold and gasket(my intake manifold had
a
> crack in it), replaced computer, replaced a crankshaft sensor? and
somthing
> with the fuel pump, replaced my torque converter and so far lastly they
have
> replaced my Cat.
>
> I've tried different octanes of gas, pings worse on lower octane.
>
> I should have bought a Toyota!
>
> Erika
>
>
> >From: "Bernd D. Ratsch" <bernd@texas.net>
> >Reply-To: dakota-truck@buffnet.net
> >To: <dakota-truck@buffnet.net>
> >Subject: DML: RE: ..And More Ping Questions.
> >Date: Sat, 30 Oct 1999 14:53:14 -0500
> >
> >Take a deep breath...
> >
> >A few things to try...(for testing purposes ONLY)
> >
> >Remove the IAT Sensor from the intake manifold and just strap it to one
of
> >the hoses right around it. (Put a 1/4NPT Plug in the hole that it came
out
> >of.) This will tell you if your running too lean or not. (There's
better
> >ways...but this is the easiest for the average home user.)
> >
> >You are correct...you can't advance the timing since the computer will
see
> >this and put it right back where it wants it. Yes, the aftermarket chips
> >advance the timing slightly for better performance (also increase the
line
> >pressure on the Automatics as well, and change the fuel curve slightly).
> >
> >As for the constant pinging...what has the dealership(s) done so far?
> >(Sorry for asking again...but lets see if we can come up with a solution
on
> >it.)
> >
> >- Bernd
> >
> >
> >-----Original Message-----
> >From: owner-dakota-truck@buffnet.net
> >Subject: DML: ..And More Ping Questions.
> >
> >
> >Ok, since I'm one who has a pinging truck I have a few questions. Keep in
> >mind I'm not the most mechanically knowledged person around. Now, if the
> >pinging in my truck is caused by a lean mixture...what might be causing
the
> >mixture to run lean?
> >
> >Second, I was told that I can't advance the timing in my truck because
its
> >all computer controlled. I have a 99, so is this true, or is the
dealership
> >feeding my another round of BS? Also, I was told I couldn't put a
> >performance computer in my truck because it WOULD advance the timing and
> >make my truck ping worse... ok gonna get some tylenol, I'm getting a
> >headache from all of this. I should have bought a Chevy.
> >
> >One more, I have the V-6, whats the CI on it?
> >
> >
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:37 EDT