Re: RE: Re: RE: Magnum 360 Short Block ?

From: Bob Mankin (bob@cadpros.com)
Date: Tue Nov 02 1999 - 20:14:52 EST


"Holloway,Frank T" wrote:
>
> Bob,
>
> I would suggest that you hold tight for a couple of months. We are in the
> process of building up an engine right now. Dick and Robert Landy are hoping
> to have a turn-key engine package for sale. We have worked with John Erb
> (the chief engineer) at Keith Black to develop a replacement HP piston for
> these engines. Most of the work is done (just waiting on the prototype
> pistons). The cam is custom grind out of Crane, Robert and Dick Landy have
> done the block and head work. We are shooting for 400 HP and we should
> easily achieve this and it will be clean (emissions wise) but not Carb Legal
> because of the intake manifold and cam (we just need to fool people). Some
> of the specs. CR 9.7/1, cam specs, .570 lift intake, .580 lift exhaust,
> duration 218 degrees intake, 224 degrees exhaust, split duration. LSA - 112
> degrees. Custom software to match the engine. Bruce & I will have pics as we
> work through the process of assembly. If you need a short block sooner, then
> either Dave Hughes @ Hughes Engines, or Kammer & Kammer can provide you with
> a custom short or long block and both do quality work...........

Frank,

Complete motor kit including the software!? You guys are gonna make this
tooooo easy :-)

Can't wait.

Bob



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:03 EDT