Greg,
You can either have your heads reworked with larger valves, or you could
find a set of 360 heads. They already have larger valves, but are identical
to the 318 heads otherwise. Since you are going to have a shop perform the
work, I would have them match the ports as well.
Rich - Ashburn, VA
-----Original Message-----
From: NVMYDakota@aol.com [mailto:NVMYDakota@aol.com]
Sent: Tuesday, November 02, 1999 1:03 PM
To: dakota-truck@buffnet.net
Subject: DML: Head Work, What to do
Well Head's seem like the path I am going to take, but Do I do Intake
Manifold and Heads, if so, jsut "port and Polish" them or do I want bigger
valves ECT. I know I need to talk to shop but aleast I can get some sort of
Background information from the DMLer's Thanks, Greg
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:03 EDT