Re: Re: RE: RE: 318 Hop Up, Heads VS NOS

From: Bob Tom (tigers@bserv.com)
Date: Sun Nov 07 1999 - 20:18:44 EST


At 12:09 PM 11/7/99 -0600, you wrote:
>I'm put crane 1.6 roller rockers on with a stud conversion kit and a cam
>motions 500 lift cam in. My friend has the same setup in his r/t and he's
>taking it to 6000-6200, is that a safe area?

It should be safe if his valve train components (lifters/valve springs/
retainers/guides/pushrods) have been strengthened and properly matched.

Message 60 since Oct. 23/99.
Bob. Southern Ontario, Canada.
'97 Dakota CC Sport, FR, 5.2L, 3.55 SG, auto.
PB 60': 2.077 PB 1/8: 9.445 @ 72.41 PB 1/4: 14.917 @ 89.28



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:08 EDT