what I mean is, I am installing all that. Do you think I can take it to 6.
I'm not putting in new lifters, guidplates, or pushrods.
----- Original Message -----
From: Bob Tom <tigers@bserv.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, November 07, 1999 8:18 PM
Subject: Re: DML: Re: RE: RE: 318 Hop Up, Heads VS NOS
> At 12:09 PM 11/7/99 -0600, you wrote:
> >I'm put crane 1.6 roller rockers on with a stud conversion kit and a cam
> >motions 500 lift cam in. My friend has the same setup in his r/t and he's
> >taking it to 6000-6200, is that a safe area?
>
> It should be safe if his valve train components (lifters/valve springs/
> retainers/guides/pushrods) have been strengthened and properly matched.
>
> Message 60 since Oct. 23/99.
> Bob. Southern Ontario, Canada.
> '97 Dakota CC Sport, FR, 5.2L, 3.55 SG, auto.
> PB 60': 2.077 PB 1/8: 9.445 @ 72.41 PB 1/4: 14.917 @ 89.28
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:08 EDT