----- Original Message -----
From: Mark Kuzia <flyboy01@worldnet.att.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, November 14, 1999 12:06 AM
Subject: HELP! I Installed my new 24# injectors today, now my truck start!
| HELP! I Installed my new 24# injectors today, now my truck start!
|
| Is there any special procedure? This is what I did:
|
| 1. Started engine and pulled the fuel pump relay. When it died, I cranked
it
| again to make sure the fuel pressure was at zero.
|
| 2. Pulled and replaced the injectors, and reconnected the harness.
|
| 3. Reset the computer.
|
| 4. Turned the key to on twice to build pressure and tried to start it. I
| kept cranking, but it did not start.
|
| 5. I checked the pressure by depressing the schrader valve on the fuel
rail,
| yep, got pressure.
|
| 6. Pulled a plug to check for fouling, none.
|
| 7. I replaced all the spark plugs to be sure.
|
| 8. I disconnected the MSD to eliminate that, still does not start.
|
| The truck will barely start, but it sound like it is running on one
cylinder
| only, and rund only for a few seconds. I don't know what to check for
next,
| please help!
|
| Mark Kuzia
| 95 Dak 5.9L, 5-spd, 4.10-SG
| 13.790 @ 99.42 mph (2.091 60 ft)
| 99 Dak 5.2L, 5-spd, 3.92-SG
| 14.896 @ 91.08 mph (2.072 60 ft)
| flyboy01@worldnet.att.net
| http://home.att.net/~flyboy01/360Dakota.html
|
|
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:11 EDT