> Well I finally am gunna put on my tune up parts
> I got Plug Wires Cap Rotor Fuel Filter Oil Filter Oil (well DUH)
Greg,
What year is your Dak first off? The spark plugs take me about 10 minutes to
take out the old ones, gap the new one and put them in. I have done this
about 15 times, so it is easy for me. The wires take another 10 minutes,
just do one at a time and dont get them mixed up. The dist. cap and rotor
should take about 5 minutes, once again, just to one plug wire at a time.
Just 2 screws holding the dist. cap on, thats it. Be sure to use plenty of
dielectric grease on the spark plugs and on the dist. cap terminals. The
fuel filter on my Dak is on the frame rail on the driver's side. Just 1
screw holding the case on and 2 hose clamps for the fuel line. I replace the
hose clamps every time I do mine, about once a year. The fuel filter shoudl
take about 15 minutes and have a small pan ready cause some gas will leak
out of the line, not much, maybe 5-6 ounces. Hope this hels. Good Luck,
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:09 EST