Dester, I don't know how you would break the terminal unless you were
overtightening them. To prevent corrosion I have used some felt type of
washers they sell at K-Mart. One is red, one is green - you put them over
the posts and then put the terminals on. I've used them successfully for
several years now, and they only cost a buck or so the last time I got some.
Cal Hyer
----- Original Message -----
From: <Dester223@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, January 23, 2000 3:23 PM
Subject: Re: DML: Re: Cleaning the IAC/Truck Dies in the Cold
> I've noticed the post on my mopar battery to be smaller than after market
> ones. I have broken the stock negative terminal clamp because it
wouldn't
> tighten all the way. I think it's just a bad connection between the
battery
> posts and the terminals....
> -Dester
>
> PS. I've stripped the bolts on the new terminals quite a few times and it
> keeps on corroding. I've tried everything I tell ya..
>
>
> << I had this problem in my 95 V6... replaced out that Dodge stock battery
> with
> a Sears battery... haven't slow started yet in this really cold CA
climate.
>
> Robert Howe
> 1995 V6 4x4
>
> >>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:00 EDT