A noise filter and a good ground on the box. I had the same "Buzzing" noise
on mine until I ran the ground to the frame instead of the battery or
engine block.
- Bernd
At 08:40 AM 04/24/2000 -0400, you wrote:
>DML,
>
> I need the experience of the DML for this one...
>
>Yesterday I installed a MSD 6A kit from www.truckperformance.com The kit
>came with a "universal harness", the brain box, and Tayler-spiro 8mm wires.
>While I was at it...I also replaced the ditributer cap and roter. FYI...I
>mounted the MSD box to the heat shield of my K&N FIPK.
>
> First question is: The "universal harness" did not fit the stock
> coil harness or fit the coil receptacle.
>Is there a specified or unique harness I have to use? For now, I cut the
>wires to the coil and added quick connect push connectors. The MSD seems
>to be running fine but I just wanted to make sure I did this right.
>
> Secondly, I have a lot of noise radiated through my stereo
> now. Is there anything I can do to eliminate this?
>
>Please help....
>
>
>-Mike Brown
>Pasadena, MD.
>
>97- CC, 4x4, 5.2L-318
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:53 EDT