With a Jet Stage-II, no your don't. It plugs inline. (Although, the
instructions state that if you experience a check engine light, to reset the
computer.)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of The Man From Utopia
Sent: Monday, May 15, 2000 6:38 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: Re: jet stage 2 first impressions...hope they aren't
lasting
Aaahhh... excuse me...You have to disconnect the NEG terminal on the battery
before installing the chip.. The computer should already be reset... But yes
the computer has the "learn" again..Give it time..
Greg
95 DSCC v6 5spd
Rahway NJ
ICQ: 283886
http://24.6.89.18/dakota/dodge.htm
DML Stickers at: http://24.6.89.18/dakota/dmlsticker.htm
> Mark,
>
> Reset the computer and let her learn from the start. I've
> found that on a
> simple "Plug and Play" (hehehe...had to use that term)
> installation, it
> takes longer to learn than with the reset method. (Both
> work, but it just
> seems to run better from a reset.)
>
> - Bernd
>
> ----- Original Message -----
> From: "mark janke" <sftvboy@yahoo.com>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, May 15, 2000 4:48 PM
> Subject: DML: jet stage 2 first impressions...hope they aren't lasting
>
>
> > Well I just got my Jet Stage 2 module in for the
> > Dakota and as soon as I fired her up I noticed my
> > exhaust sounded much quieter. I used to have a nice
> > rumble when I started. A couple straight line
> > accelerations from a dead stop and I swear my 3.9 has
> > gotten slower since putting the module on, that's odd.
> >
> > I've heard these things take time for the computer to
> > adjust?
> >
> > Welll I'll give it awhile before inquiring about a
> > refund.
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Send instant messages & get email alerts with Yahoo! Messenger.
> > http://im.yahoo.com/
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:19 EDT