1.5 feet of mud... that's 18 inches. Is that right? Last time I was
off-roading, the high water mark on the truck was an inch or two over
the top of the 31-inch tires. And I was pulling Jeeps out of holes that
I made it through :-). Like, this one:
http://www.chris.usethis.com/4x4/2000-05-06-swift-rapids/03-Dakota-Christopher.jpg
Although, to be fair, that was just deep water, I'm not sure how deep
the muck was on the bottom.
How long was your truck burried? It would probably be a good idea to
check all the fluids (differentials, transmission, transfer case, oil,
etc.) to make sure you didn't get any water seeping into anything.
---------------------------------------------------------
Jason Bleazard http://www.bleazard.net Toronto, Ontario
his: '95 Dakota Sport 4x4, 239 V6, 5spd, Reg. Cab, white
hers: '98 Dakota Sport 4x4, 318 V8, Auto, Club Cab, black
roloff wrote:
>
> the s-10 got me part of the way out then a front end loader got me the
> rest of the way out i was really barried! all clean now!
>
> Skelley99@aol.com wrote:
> >
> > In a message dated 5/28/00 4:14:02 PM Eastern Daylight Time,
> > roloff@mail.northlink.net writes:
> >
> > << okay heres the deal i got my truck barried! the only problem is that an
> > s-10 is going to be pulling me out :( its in about 1.5ft of mud right
> > now I should have it out within an hour or so, I'll let you guys
> > know if I broke anything I dont think so but who knows.
> > >>
> >
> > Thats got to be hard to deal with!! Im used to pulling S-10's out!
> >
> > Steven Kelley
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:27 EDT
