Thanks, I'll give it a shot. I think I'll have to get
an easy out because it's in there pretty good. I
appreciate the help. 94 dak's rule, Seth
--- DGB <dgbcms@bayland.net> wrote:
> First see if you can spin it out using a tool with a
> sharp
> point. If not get a little tool called an EZ-out
> (any Auto
> Parts store should carry them). You will have to
> drill a
> small hole, about the size of the tip of the EZ-out.
> Insert
> the tool in the hole and rotate CCW. It is tapered
> and has a
> coarse helical taper on the o.d. so you may have to
> tap it
> to get it to dig in enough to rotate the broken off
> portion.
>
> 73 Dwight W9YQ
>
> '94 DAK Stock!
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail – Free email you can access from anywhere!
http://mail.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:44 EDT