> Oops...my mistake: $195 for the set from Summit Racing - P/N:
> FMS-M9593C302 - 19 lb/hr flow rate (24# are $209)
>
> Those are on my truck and they are an exact fit. The acceleration also
> picked up a little bit as well. As for the installation, VERY easy and
can
> be done with hand tools. Just undo the bolts holding the fuel rail, list
> the rail off of the old injectors (no need to disconnect the rail at all),
> pull the old injectors, clean the holes, insert the new injectors on the
> rail and reinstall the rail with the new injectors. It's that easy.
Bernd,
Thanks alot for this info. Do you happen to know what the flow rate is for
the stock injectors? Will these 'aftermarket' injectors affect mpg at all?
Thanks again,
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:56 EDT