In a message dated Tue, 15 Aug 2000 4:07:44 AM Eastern Daylight Time, Roy Chaplin <rchaplin@dowco.com> writes:
<< I have a 1993 Dakota with a 318 that has a miss and comes up with the
code 27. I know this has to do with the injector output driver and
narrowed it down to injector #2 (I got it checked at a garage where a
friend works). I checked the wiring and it is OK. I need to know if a
bad injector will cause this and trigger the check engine light and code
27 or could it be the Engine Controller?
>>
Swap the injector with a known good working injector and see what happens.
Don
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:25 EDT