Yep, the Dodge ones go on in the up position.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Mike Lohmeyer
Sent: Wednesday, August 30, 2000 8:38 PM
To: dakota-truck@buffnet.net
Subject: DML: Bed Extenders - who makes them?
Who makes bed extenders? I assume they are available from Dodge
(Mopar?), but the ones I have seen are not acceptable.
Here's my problem. I plan to haul motorcycles with my Quad Cab.
This works fine with the tail gate down. A bed extender would help
prevent other stuff from flying out the back of the truck. But, I
need a bed extender that can be removed while I load the bike, and
then replaced by attaching it from the rear (sliding it in from the
rear). Most bed extenders I have seen (except for those found on
Ford F150 Crew Cabs) mount by holding them straight up and dropping
them into the pivot points (see the link below as one example). But,
with a bike in the way, I can't do that.
http://www.autostyles.com/truckbedextender.htm
Who else makes bed extenders?
Thanks.
Mike
____________________
Mike Lohmeyer
mike@akhara.com
(408) 486-5281
San Jose, CA
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:51 EDT