It was a dyno.
-----Original Message-----
From: Gmblows@aol.com [mailto:Gmblows@aol.com]
Sent: Thursday, September 21, 2000 10:12 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: FYI - VA Emissions Test
That is awesome news!
24# injectors and all... Wooo Hoooo!
I guess you have a very well matched setup.
Was it just a sniffer at idle, or a dyno setup?
<< Just thought some of you Virginia DML'ers might me interested in this. I
just took my '96 in for it's biannual emissions test. Passed with flying
colors. So you might ask "What's the big deal?" I ran it with all my
performance mods in place; nothing removed or returned to stock. Readings
were slightly less than half the allowable limits. I think this says a lot
as to just how clean/efficient our engines are performing. Here's the way
it was tested. This was on a 318 with a 5-speed tranny.
K&N FIPK, F&B TB, MPI intake, 24lb. injectors, Hughes HER0612AL cam, JBA
headers, Mopar PCM, 180º tstat, relocated air intake sensor
Rich - Ashburn, VA >>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:43 EDT