Uhhhh...both the posts under the fuse box are "Hot". The Black wire needs
to go to either the NEG battery terminal or grounded on either the frame or
body.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
Subject: DML: MSD install help (kinda long)...
Folks-
Removed the battery to mount the MSD box behind it -- wired everything.
Checked it three times from stem to stern, everything was according to the
instructions, and everything agreed with Ron Wong's *numerous* step-by-step
instructions posted here. Big red and black wired were mounted to the posts
underneath the fusebox lid. Small Red and White wires follow a different
path than the Black/Grey and Orange/Green wires, and BOTH are well separated
from the coil and spark plug wires. Re-mounted the battery, connected the
positive cable.
Grady Ogburn
'98 Sport CC 4x4
5.2l, 5 Speed
Mesa Headers & Cat
K&N FIPK, JET PCM
Gibson/MagnaFlow "FrankenPipe" Exhaust
Leer Topper
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:06 EDT