RE: RE: Top Speed of the 2000

From: Barret, Matt (MATT_BARRET@earthtech.com)
Date: Mon Oct 02 2000 - 13:20:17 EDT


We're talking about 2 different animals here I think, 5.9 is 4800, 4.7L is,
well, unknown, I've gone to 6000 rpms and not hit it yet??? might be a
slight error in the factory tach.
BTW, Mike Leach Co. tells me that the speed limiter has a maximum numeric
value of 254, thats as high as it can be set. I guess that'll be ok ;)

Matt

-----Original Message-----

<>From: Stlaurent Mr Steven [mailto:STLAURENTS@mctssa.usmc.mil]
<Sent: Monday, October 02, 2000 12:57 PM
<To: 'dakota-truck@buffnet.net'
<Subject: RE: DML: RE: Top Speed of the 2000

<<It is 6000 when you run an automatic through the gears manually. >>

-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com

 -----Original Message-----
From: Ronald Wong [mailto:ron-wong@home.com]
Sent: Monday, October 02, 2000 9:40 AM
To: dakota-truck@buffnet.net
Subject: RE: DML: RE: Top Speed of the 2000

Nope, two separate things from what I could tell. RPM limiter on a stock
PCM is 4800, speed limiter is around 115 mph. HP PCM RPM limiter is 5200 and
speed limiter is....UP UP and AWAY!

Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Marty Galyean
Sent: Monday, October 02, 2000 8:37 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Top Speed of the 2000

My experience is that its more of an rpm limiter than a speed limiter but
that it takes both rpm and speed into account.
I can get 110+ if I ease it up there and stay out of the high rpms, but if
I'm kicking it it cuts out mid 90s.

Maybe mine is broke. Anyone else's behave like this?

Regards,
Marty

Ronald Wong wrote:

> Hmmmm...that's rather a low limit. Maybe for 4.7's but mine was at
> 115....until I put the HP PCM in.
>
> Ron
> 00 SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of MALDBNSF@aol.com
> Sent: Monday, October 02, 2000 12:02 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Top Speed of the 2000
>
> I just had my Y2K QC up to 97mph and the computer would
> limit it there. Is this about the right top speed limt on the Y2K's? The
> 4.7L still had power to give as it was cutting out on me.
>
> Don Mallett
> geocities.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:45 EDT