At 10:48 AM 10/19/00 +0300, you wrote:
> <snip>
>For those of you with scanners, During WOT, What is your total timing value
>(minimum)...The trucks Ive seen back off to a solid 19-20 BTC... pretty weak
>for HP...Mopar small blocks Love lots of advance at WOT for power.. Bruce.
Hi, Bruce.
I recorded two 1/4 mile runs using a '96 Mopar PCM on my scanner.
Both runs showed a minimum of 25 degrees just after the 2-3 shift
with OD off at about the 3700 rpm range. Maximum advance was 31
degrees in third at the 4700 to 4900 rpm range.
I also tested a custom programmed computer which was calibrated
for a blown/juice app. On both runs, WOT minimum advance was
17 degrees and max. was 21 degrees (if I remember correctly).
Bob. Burlington, Ont., Canada.
'97 Dakota CC, 5.2L, 4x2, 3.92 SG, auto., 4265 lb.
Dyno: 231.2 rwhp 340.0 lb-ft rw torque
PB: 14.737 @ 91.75 9.364 @ 72.95
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:12 EDT