>>> I don't know if they're self alligning, I assume not since the seller is
> advertising Rockers, Guideplates and studs as a package. My truck is rev
> limited to 5200 rpm so the RPM isn't an issue right now. I think
> if I did
> install the Crowers I'd get the new pushrods and use the
> guideplates, better
> safe than sorry.<<
Yep!! That's me!!
I don't have the pushrods... Crower says you can't use the 1.7 pushrods with
the 1.6 rr's because they are .050 longer than the stockers. I ended up
using the Crower pushrods in my motor w/Hughes roller rockers. E-mail me at
miggitymike@fast4x4.net if you have anymore questions =)
The rockers are still in the box, so I haven't checked to see if they are
self aligning...
-miggity
slammed 88 Dakota --> 360 swap in progress!!
miggitymike@fast4x4.net
http://surf.to.Project13s
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:19 EDT