Gregg,
Thanks, that thought crossed my mind earlier, but then I thought, Nah, that
will never work. I'll go dig up my rubber mallet. Thanks again.
Rich
-----Original Message-----
From: greasy [mailto:greasy@dodge-trucks.net]
Sent: Friday, January 26, 2001 7:16 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: Head Removal Help
SMACK THE FRONT OF THE HEAD WITH A RUBBER MALLET!!!
I USED TO WORK AT A JUNKYARD PULLIN APART CLASSICS AND THATS THE BEST
WAY TO DO IT THERE.
IT WORKED ON MY OLD PONTIAC TOO.
GREGG
----- Original Message -----
From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, January 26, 2001 4:30 PM
Subject: DML: Head Removal Help
> I'm pulling the heads off the 'ol 318 tonight. At least I'm trying to. I
> removed the head bolts, but can't get the heads to come loose from the
> block. What's the best (safest) way to get them to break free so I don't
> scratch either surface?
> Rich - Ashburn, VA
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:44 EDT