my coil wire is plenty long... on both sets I've bought..
the dist. ends are very tight, I trimmed the small ridges off the sides of
the boots and put all the cyl wires on 1st, then used a socket extension to
persuade the coil wire on the dist.
______________________
Jon Smith--Raleigh, NC
www.fast4x4.net
jon@fast4x4.net
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
-
-I just picked up 2 sets of msd 8.5mm wires. 1 for my 95 and 1 set for the
-shelby. when I went to put them on the 95 they didn't seem to fit to well
-on the distributor cap. it's kinda sloppy, I think they should
-have a tight
-fit. I checked them against my old cap and it was the same way? any
-suggestions. Also, what are you folks doing for a coil wire. The msd wire
-isn't near long enough, again suggestions?
-
-TIA
-
-Scott Miller
-89 Shelby Dakota #322 - 360 C.I. V8 (12.25 @ 112.41 mph) "FASTDAK"
-95 SLT CC V8 5.2 auto
-
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:22 EDT