Glad to hear it, let me know how it goes Tom.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
360ci, 5-spd, 4.11 LS(8 3/4 coming soon), Cowl-induction
(A new E-body 8 3/4 [3.90 SG] has been built by Reider Racing)
http://www.twistedbits.net/WWWProfile/dakota/FqNiqqo2UjQOY/
----- Original Message -----
From: "Tom Slick North" <prodog@swbell.net>
To: "DML" <dakota-truck@buffnet.net>
Sent: Tuesday, March 20, 2001 11:57 PM
Subject: DML: Trying to figure out why it's not running like it should...
> Well, I finally got the chance to start doing a little checking and
testing
> on the Dakota today...
>
> Performed a fuel pressure check - 45psi... no prob there...
>
> I just got in my Factory service manual in earlier this week; money well
> spent, already!
>
> I'm taking the Dak over to a dealer tomorrow, and make sure that the
> distributor was indexed properly...as I found that if it isn't, that the
> camshaft sensor will be off and that it helps control the fuel
injectors...
> I'm going to also have them check all the sensors, and check the A/F ratio
> to see if it is running lean...
>
> In tranny news on my Dak, I found that the trans pan has a small leak...
> going to replace the pan gasket as soon as I get the chance...
> plus, I got outbid at the last minute on a shift kit for it, too... damn
> last minute bidders!!!
>
> Anyway, I'll keep you all posted...
>
> Later,
> Tom "Slick"
>
> My Homepage -
> http://home.swbell.net/prodog
> Dakota Profile -
> http://www.twistedbits.net/WWWProfile/dakota/EzewC1MzHo2lA/
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:19 EDT