Bill,
Forgot to mention I was pulling 16-16.5in. of vacuum before changing the
cam.
Rich
-----Original Message-----
From: SEMIHEMI01@aol.com [mailto:SEMIHEMI01@aol.com]
Sent: Saturday, June 02, 2001 11:40 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Vacuum Help Please
Rich,
Sounds like you have a vacuum leak somewhere. Unless you put in a cam
with a monster amount of overlap. Your vacuum should not have changed that
much. Even with a SC'er I still pull 18-19 inches at idle, same as before
installation. I pull 11 inches at hiway speed unless I'm accelerating.
Bill
SEMIHEMI01@AOL.COM (Bill C.) 2001 QC, 4.7L, KENNE BELL SC'ed, 5spd.
3.55 LSD, Bored & polished TB, 10w-30 MOBIL 1, GIBSON 3" Single <A
HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:44 EDT