Call Marty@KRCPeroformance www.krcperformance.com
I've had great luck with him... He got me a custom cam, R/T Heads ported,
ect.... Extremely nice guy to deal with...
Tim Berry
> Here's a question for everyone.
>
> I am debating several items as the next modification for my baby.
>
> 1) Crower Roller Rockers and new Push Rods for over 5500RPM use. Won't get
> over 5500RPM's till I get a new cam so I was thinking of these first.
>
> 2) New Cam and Roller Timing Chain tuned for my setup that's listed below.
>
> 3) 4.10 Gears for both the front and rear diff's. I currently have 3.5's
and
> could really use the lower launch these would provide.
>
> 4) This is a bit out of my range right now but R/T heads, ported and
> polished.
>
> I'm thinking of going with the gears for now as that will give me the most
> butt bang for the buck at the moment I think. I was thinking of saving up
> and doing the Heads, Roller Timing Chain, M-1 Manifold, and Cam all in one
> big swoop. I'd probably have a shop do that work, as I would be worried of
> screwing it up.
>
> Based on the mods I have what would be you guy's suggestions???
>
> Thanks,
> Shawn
>
> 98 5.2L 4x4 CC
> Powerdyne 9PSI Supercharger
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:44 EDT