Did you get the rockers from Hughes' also?
-- Doug Myers ------------- '99 Dakota RC/SB 5.2L/5-speed/3.92SG K&N Gen II, B&F Billet TB, Hughes Stage 1 Intake, MP cam/lifters, MP headers, MP catback, MP plug wires, Accel Supercoil, 180 T-stat, Custom Computer by Ron Zimmer, Centerforce Dual Friction Clutch<Pukeloser@aol.com> wrote in message news:25.167eb746.2853293e@aol.com... > Hey all, > > I'm back on the list after a long break (was going through withdrawls). > Anyway I moved from CA back to OHIO which put alot of my perf work on hold, > but I'm back at it again. > I have to install a modified manifold/TB/injectors (24#) and some alum roller > rockers (1:6 ratio). > I was wondering if there is anything in depth about installing the rockers > and how I adjust them once they're in. > I also was wondering what y'all might recommend for an air cleaner to replace > the stock airbox? I was thinking about the K&N 14"x3" but would have liked > something that draws cool air rather than the engine compartment air. I also > think I'll need an S-bolt for the airbox and wasn't sure what to ask for when > I order one so any help here would be appreciated too. > I only live about 45 minutes from Summit Racing equip. so I'm hoping they'll > have some of the stuff I'll need. > Thanks > > John S: > '95 cc 318, 180 stat, MSD digi6+,MSD 8.5 wires, HP cap+rotor, MP PCM, DT > headers, Gibson exhaust, no cat (3" from headers to tailpipe"), Transgo shift > kit, K&N filter, 1 quart oil filter (relocated), auburn LSD, superior axles, > 4.10 gears > To do this month: > ported TB, hughes engines intake manifold, 1:6 magnum roller rockers, MP alum > valve covers, Progear double roller timing chain > To do this winter: > project 408 stroker/ 9.25 rear end (and custom drive shaft so it doesn't go > flying away on me)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:46 EDT