Re[2]: LA valve covers on a Magnum Engine

From: Michael Clark (mike@mikesdakota.com)
Date: Mon Jun 11 2001 - 14:05:06 EDT


I'm pretty sure they have a set. However I got the universal set and
cut my own to the EXACT length I wanted. Anyone who has seen my wires
will agree they are nice and neat. The pre-cut sets I *think* don't
come in as many colors as the universal fits. Check with
www.speedtweaks.net I think Bernd sells Taylor wires there.

--Mike
www.mikesdakota.com

> At 07:17 PM 6/10/01 -0500, you wrote:
>>Good luck with the Blue Max wires. I had a set and they were the
>>worst wires I've ever bought. After removing them a few times the
>>plug boots (factory crimped mind you) came off of several wires. If
>>you've already got them go ahead and use them just be real careful
>>when changing plugs and they may last a little while. I recommend
>>Taylor wires, those things are pretty much indestructible. --Mike

> Mike

> Do you know if Taylor makes a custom set for the magnum 318
> (part #?) or do they need to be put together for the magnums? TIA.

> Bob Tom Burlington, Ont., Canada
> '97 Dakota Sport, 4x2, CC, Flame red, 5.2L, auto., 3.92SG



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:47 EDT