Michael Meyerhoff <mikemeyerhoff@kc.rr.com> wrote:
: I got a set of lakewood track bars in the mail today... it says to tighten
: the u-bolts firmly to the spring and then adjust the bumper to 1/2". How
: the h##l do you adjust the bumper??
: It is just bolted onto the bar. There is no way to adjust it i can
: see. Someone help me out here, I'm missing something simple.
What I did was to make some metal shims, which I put at the back
of the traction bar to raise the snubber. (Got some strips of metal
which I cut to about the right length, drilled a couple holes in
them for the U bolt to run through, and installed them between the
spring and the traction bar at the back u-bolt).
---Jon-
.---- Jon Steiger ------- jon@dakota-truck.net or jon@jonsteiger.com -----. | Affiliations: AOPA, DoD, EAA, NMA, NRA, SPA, USUA; Rec & UL Pilot - SEL | | '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 | `------------------------------------------ http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:50 EDT